Tips to clean your computer from dust to remain durable

Tips to clean your computer from dust to remain durable - To keep the computer / PC to clean and durable in terms of both hardware and software is one of the steps we have to do is to clean up the device on a regular basis. Cleaning is not only done on the system, such as removing viruses or clear the cache on your computer / PC. However, cleaning hardware such as the screen and the casing must also be done to remove dust attached.

Dust on parts or components of the PC will adversely affect the performance and durability of the computer. Due to the presence of dust, the computer can be damaged due to overheating. Although in a box or a PC monitor screen are cooler, but if too much dust cooling performance will be less than the maximum.

But can lead to over-heating, all the good dirt dust or smoke residue can lead to corrosion of the metal on a computer device. If it is in the course let the computer device will be easily damaged.

To clean your computer from dust, you simply set up some equipment such as wipes, cleaning solvents, air compressor / vacuum cleaner small, little water or alcohol, and rubber bands to bind cables at the time of PC / computer in the clear. This is different from cleaning the PC operating system. When cleaning the OS on your computer using the best antivirus. But to clear the hardware, you prepare is equipment that been mentioned above earlier.

Steps to clean the computer / PC

Before you do the cleaning, check the flow of electricity. Make sure the power supply to the PC and to the screen has been turned off. And do not pour water directly onto the PC and the monitor screen. Spray or pour the liquid into a soft cloth and wipe to a PC or monitor. Make wiping with liquid just to the outside only.

To the cooling fan vent holes and other ventilation holes, you can spray using a lean air compressor. Or if there is no wind pressure, you can use a soft brush or a small brush to remove dust and dirt.

On the PC, you can disconnect the wires from each outlet to be more liberal in clearing the narrow part. In addition, you can also release the hard drive or floppy. But if you are not familiar, better leave it alone so that no matter when in the post again later.

Before the wash with winds lean, clean first the inside of the PC using a soft brush or a brush with caution. Make sure the dust stick to the lost and uplifted.

After everything is clean, replace the cables and plug hard drives and floppy into place, and close the PC casing.

To clean the monitor, clean the ventilation holes with a soft brush and use a cloth soaked in alcohol. Wipe all parts of the monitor until clean and free of dirt.

As for the keyboard, use a soft brush to clean the way behind to keep dust and dirt contained in between the keys of the keyboard disappear. After that, wipe with a soft cloth to clean with alcohol. Similarly in the mouse, wipe the optical parts in order to clean using a cloth soaked in alcohol.

After everything is cleaned, replace cables on the device perfectly.